You have been redirected from The Intergas Shop to MWPHS.co.uk, our new home for non-Intergas products!

Primary Pro 22mm x 25mm x 1000mm External Pipe Insulation (AS045)

£11.15

61 in stock (can be backordered)

Compatible Products

Primary Pro 22mm x 25mm x 1000mm External Pipe Insulation (AS045)

Features:

This 22mm Primary Pro insulation is specifically designed to insulate external heating pipework for external oil boiler systems.

Primary Pro’s unique design keeps external installation pipework dry and therefore prevents pipework heat loss, as all insulation joints are sealed with Condensate Pro Bond & Seal.

Primary Pro 22mm x 25mm x 1000mm has a unique weather & UV protective coating and fits 22mm copper pipework with soldered or press fit fittings. Primary Pro has a 25mm insulation wall thickness and is sold in 1000mm (1 meter) lengths, so you can cut and mitre to the required application. You can use the Primary Pro Sleeve with this insulation, to insulate through the wall to ensure no heat is lost to the wall/cavity and that the insulation is safeguarded from rodent and mortar damage when piping through cavity walls.

When installing external oil boilers, it is extremely important that the external heating pipework and fittings are insulated correctly, to make sure every bit of energy generated by the oil boiler is used efficiently. Completing heat loss calculations and designing systems to maximise efficiency are a complete waste of time, if you are not insulating and sealing external pipework correctly. Until now, the insulation products available for external pipework have been very hard to install to a standard that not only retains the heat/efficiency, but also looks aesthetically pleasing to the customer/homeowner.

Primary Pro 22mm x 25mm insulation provides the perfect solution for external heating pipework and for also insulating around other external fittings, like isolation valves. Primary Pro helps the professional installer fit the very best installation in all weathers and looks quality at customer’s homes or property. It is 100% weatherproof out the box, so there’s no having to paint the insulation to protect it. Primary Pro insulation can be cut to length and mitred easily. Primary Pro is simple to maintain without having to replace or renew any of the insulation throughout the lifetime of the heating system, so saving on lifetime cost and the environment. Installers find it simple and cost-effective to protect any external heating pipework with just Primary Pro insulation and Bond & Seal. Primary Pro insulation can be also used to insulate through the wall (with use of Primary Pro Sleeve) to the length needed and then sealed to any wall fabric with the Bond & Seal. Both the unique coating on the insulation and the Bond & Seal expands and contracts in all different temperatures. Maintaining Primary Pro insulation throughout the life of the heating system could not be easier, as all it needs is recoating with the water-based Condensate Pro Maintenance Coat as and when needed. (See Condensate Pro Maintenance Coat info here).

 

 

Reviews

There are no reviews yet.

Be the first to review “Primary Pro 22mm x 25mm x 1000mm External Pipe Insulation (AS045)”

Your email address will not be published. Required fields are marked *