Primary Pro 42mm x 19mm x 500mm External Pipe Insulation For Heat Pumps (AS043)

When installing Air Source Heat Pumps it is extremely important that the external heating pipework and fittings are insulated correctly, to make sure every bit of energy generated by the heat pump is used efficiently. Completing heat loss calculations and designing systems to maximise heat pump efficiency are a complete waste of time, if you are not then insulating and sealing external pipework correctly. Until now the products available have been very hard to install to a standard that not only retains the heat/efficiency but also looks aesthetically pleasing to the customer/homeowner.

Primary Pro 42 mm x 19mm insulation provides the perfect solution for insulating around other external fittings, like lever valves and antifreeze valves. Primary Pro helps the professional installer fit the very best installation in all weathers and looks quality at customer’s homes or property. It is 100% weatherproof already, so there’s no having to paint on installation to protect it. It can be cut to length to insulate straight through the fabric of any wall (no other kits needed). It is simple to maintain without having to replace or renew any of the insulation throughout the lifetime of the heating system, so saving on lifetime cost and the environment. So simple and cost-effective to protect any external heating pipework with just Primary Pro insulation and Bond & Seal. Primary Pro insulation can be also used to insulate through the wall to the length needed and then sealed to any wall fabric with the Bond & Seal. Both the unique coating on the insulation and the Bond & Seal expands and contracts in all different temperatures. Maintaining throughout the life of the heating system could not be easier as all it will need is recoating with the water-based Condensate Pro Maintenance Coat as and when needed.

(See Condensate Pro Maintenance Coat info here).