You have been redirected from The Intergas Shop to MWPHS.co.uk, our new home for non-Intergas products!

McDonald STEELflow 250 Litre Indirect Unvented High Gain Cylinder (CCS250HP)

£947.81

Available on back-order

McDonald STEELflow 250 Litre Indirect Unvented High Gain Cylinder (CCS250HP)

Features:

  • High grade duplex stainless steel
  • 25 Year guarantee
  • Corrugated coil for maximum heat transfer
  • Post weld treatment for maximum durability
  • Low heat losses
  • High density foam insulation
  • Pressure loss on heat pump coils less than 0.4 bar

All 250 Litre Indirect Cylinders are supplied with:

  • 22mm Altecnic Inlet Combination Control Set
  • 24 Litre Zimlet Expansion Vessel with Fixing Kit
  • 28mm EPH 2 Port Motorised Zone Valve
  • Altecnic 1/2″ T&P Valve
  • 15 x 22mm Tundish
  • ESi High Limit Thermostat
  • Installation Manual

All Units to Following Specification:

  • 90 Degree Elbow on Hot Water Draw Off (22mm compression)
  • Secondary Return (22mm compression)
  • T&P Valve (1/2” Female)
  • Thermostat Pocket (1/2″ & NTC Pocket)
  • Low Level Immersion Heater (1 3/4” Female)
  • Heat Pump Coil Flow / Return (1” BSP Female with 28mm Compression Adaptors)
  • Cold Feed (22mm compression)

 

The STEELflow heat pump unvented cylinder is manufactured from duplex stainless steel, and specifically designed for use with either air source or ground source heat pumps. It has a high efficiency corrugated coil heat exchanger, to heat the full volume of water held within the cylinder. The coil’s corrugated design provides high heat transfer and flow rates from the heat pump, with faster recovery times than plain coils due to the increased surface area.

 

Capacity (L) Height Cold Inlet Heating Flow Return Immersion Mid-Coil Pockets Secondary Return T&P Valve/High Limit Coil Surface Area (m2)
200 1405 180 865 250 190 465 1028 1189 2.97
250 1699 180 865 250 190 465 1340 1501 2.97
300 1924 180 865 250 190 465 1563 1724 2.97
Capacity (L) Weight Empty (kg) Weight Full (kg) Standing Heat Loss (kWh/24h) Standing Heat Loss (W) ErP Energy Rating Heat Pump Coil Rating (kW) Heat Pump Coil Rating (kW) Reheat Time (mins) Reheat Time (mins) –
200 47 236 1.70 71 C 31.50 21.21 14.66 21.12
250 51 280 1.99 83 C 33.08 20.33 17.71 26.68
300 55 331 2.26 94 C 35.44 19.22 21.53 33.63

Reviews

There are no reviews yet.

Be the first to review “McDonald STEELflow 250 Litre Indirect Unvented High Gain Cylinder (CCS250HP)”

Your email address will not be published. Required fields are marked *