Primary Pro 42mm x 19mm x 1000mm External Pipe Insulation For Heat Pumps (Box of 16) (AS042)

Box Contents:

• 16 lengths of Primary Pro 42mm x 19mm x 1000mm

Features:

Primary Pro is specifically designed to insulate external heating pipework for heat pump systems.

Primary Pro’s unique design keeps external installation pipework dry and therefore prevents pipework heat loss, as all insulation joints are sealed with Condensate Pro Bond & Seal.

Primary Pro 42mm x 19mm x 1000mm has a unique weather & UV protective coating and fits 42mm copper pipework with soldered or press fit fittings. Primary Pro has a 19mm insulation wall thickness and is sold in 1000mm (1 meter) lengths, so you can cut and mitre to the required application.

When installing Air Source Heat Pumps it is extremely important that the external heating pipework and fittings are insulated correctly, to make sure every bit of energy generated by the heat pump is used efficiently. Completing heat loss calculations and designing systems to maximise heat pump efficiency are a complete waste of time, if you are not then insulating and sealing external pipework correctly. Until now the products available have been very hard to install to a standard that not only retains the heat/efficiency but also looks aesthetically pleasing to the customer/homeowner.

Primary Pro 42 mm x 19mm insulation provides the perfect solution for external heating pipework and for also insulating around other external fittings, like lever valves and antifreeze valves. Primary Pro helps the professional installer fit the very best installation in all weathers and looks quality at customer’s homes or property. It is 100% weatherproof already, so there’s no having to paint on installation to protect it. It can be cut to length to insulate straight through the fabric of any wall (no other kits needed). It is simple to maintain without having to replace or renew any of the insulation throughout the lifetime of the heating system, so saving on lifetime cost and the environment. So simple and cost-effective to protect any external heating pipework with just Primary Pro insulation and Bond & Seal. Primary Pro insulation can be also used to insulate through the wall to the length needed and then sealed to any wall fabric with the Bond & Seal. Both the unique coating on the insulation and the Bond & Seal expands and contracts in all different temperatures. Maintaining throughout the life of the heating system could not be easier as all it will need is recoating with the water-based Condensate Pro Maintenance Coat as and when needed. (See Condensate Pro Maintenance Coat info here).