HG Series 250 Litre Unvented Cylinder (HG250A)
The HG Series, designed by heating experts Heat Geek, is designed to deliver superior hot water solutions for modern homes. Whether you’re upgrading your existing system or installing a new one, the HG200A offers unparalleled reliability and energy savings, making it the most efficient hot water cylinder available in the UK.
Plus, enjoy free shipping on this item to England & Wales only!
Product Specification:
| Volume: | 250 L |
| Dimensions Before Insulation & Casing: | 1660x450mm |
| Coil Surface Area/ Connection Size: | 6.0m² / 1”F BSP |
| Coil Flow Connection Height (from base): | 1290mm |
| Expansion Relief Valve Connection: | N/A (should be tee’d into cold pipework) |
| Insulation Thickness: | 50mm |
| Dimensions Including Insulation & Casing: | 1710x550mm |
| Standing Heat Loss: | 2.15 kWh/24h |
| A-G ERP Heat Loss Rating: | C |
| Pressurisation Description: | Unvented |
| Heat input Description: | Single coil (HP) |
| Manufacturing Material: | 1.0mm Duplex SS for 375mm & 450mm units / 1.5mm 316L SS for 500mm diameter units |
| Orientation: | Vertical |
| Product Type: | Cylinder |
| Normal Working Pressure: | 3.0 Bar |
| Maximum Working Pressure: | 6.0 Bar |
| Test Pressure: | 9.0 Bar |
| Cold Mains Inlet: | 1″F BSP (with internal 35mm diffuser tube – no side holes, open-ended, not flared) |
| Hot Mains Outlet: | 1″F BSP |
| Heat Input Coil: | Surface area varies – See Models Specification.
Bottom lap is stretched down into base. |
| Controls: | 2x ½”F BSP Connections With Fitted 10mm Dry Pockets |
| Secondary Return Connection: | 22mm compression |
| TPRV Connection: | ¾”F BSP |
| Drain Valve Connection: | ½”F BSP |
| Immersion Heater Boss(es): | 1x 1¾”F BSP (positioned at halfway up) |
| Carrying Handles: | In case body – 2 at high level, 2 at low level, each pair spaced approx. 90° apart (centred opposite the coil connections for balance) |
| Control Mounting Plate (to accommodate controls/ literature): |
320 x 230mm (portrait orientation) (top edge positioned 50mm below case lid) |
| Finish: | Metallic silver case |
| Labels: | HG-branded data label, HG logo sticker, JTE sticker. Supplied Loose |
| Components: |
|
For more information, click here to view the data sheet.
Reviews
There are no reviews yet.