You have been redirected from The Intergas Shop to MWPHS.co.uk, our new home for non-Intergas products!

Ultra High Recovery 117 Litre Vented Hot Water Cylinder (900 x 450)

(1 customer review)

Tesla Incoloy 14" Immersion Heater & Thermostat (TIH645)

11 in stock

5 in stock (can be backordered)

Compatible Products

Ultra High Recovery 117 Litre Vented Hot Water Cylinder (900 x 450)

Nicknamed “The Betty” our Ultra High Recovery Copper Vented Hot Water Cylinder was specifically designed by MWPHS to replace standard 900 x 450 vented cylinders. This 21st century cylinder is perfect for system boilers and heat pumps using Priority Domestic Hot Water (PDHW) to maximise hot water recovery times and efficiency.

The Ultra High Recovery 117 Litre Vented Hot Water Cylinder (900 x 450) box contains:

  • 1x 900 x 450 Ultra High Recovery Copper Vented Hot Water Cylinder
  • 1x 14″ Tesla Incoloy Immersion Heater

Technical Specifications:

  • Copper Cylinder Height – 900 mm
  • Copper Cylinder Diameter – 450 mm (dimension does not include insulation this is +100mm typically)
  • Weight (empty) – 13 kg
  • Weight (full) – 130 kg
  • Energy Efficiency Class – C
  • Heat Up Time (coil) – approx. 12 Minutes (with 30kW heat input)
  • Standing Loss (24hrs) – 2.27kWh

Cylinder Features:

  • Copper Grade 3 (10m head max.)
  • 2m2 surface area ultra high recovery copper coil
  • Integron coil technology for maximum heat transfer and performance
  • 22mm compression connections fitted as standard to all outlets
  • 6mm thermostat pocket for boiler/heat pump NTC sensor
  • Separate secondary return/shower pump tapping (22mm compression near top of cylinder)
  • 5 Year Warranty (terms and conditions apply, including fitting a suitable scale reducer in hard water areas. We recommend the Hydropath Pearl)

 

1 review for Ultra High Recovery 117 Litre Vented Hot Water Cylinder (900 x 450)

  1. Mike Walton

    I have been using MWPHS for afew years now and they always deliver great products and a efficient service. This installation is to replace a very old Potterton Profile and cylinder. We are converting the system to PDHW with Opentherm control to give the customer the benefit of low temperature, modulated heating and fast efficient hot water recovery. Perfect product for what the customer requires it for.

Add a review

Your email address will not be published. Required fields are marked *